Brake Caliper - 45SKV354 ESEN SKV

A caliper is a caliper-shaped body that houses one or more brake cylinders. During braking, the hydraulics act on the pistons in the cylinders, and they press on the pads, pressing them against the brake disc and thus slowing down the rotation of the wheel.

The ESEN SKV brand Brake Caliper is installed above the brake disc. The caliper is usually made of cast iron, less often of an aluminum-based alloy. Its design can have a fixed or floating bracket.

1. TOURNEO CUSTOM V362 Bus (F3)
2. TRANSIT CUSTOM V362 Bus (F3)
3. TRANSIT CUSTOM V362 Van (FY, FZ)
4. TRANSIT V363 Bus (FAD, FBD)
5. TRANSIT V363 Van (FCD, FDD)
6. TRANSIT V363 Platform/Chassis (FED, FFD)
7. TRANSIT V363 Platform/Chassis (VQ, FED, FFD)
8. See more in applications

The construction of the brake caliper

The forces are transmitted via the highway to the front or rear caliper. The fluid drives the brake piston. He pushes the pads towards the disc. Each caliper can have from one to eight cylinders. A rubber boot, the condition of which largely determines the correct operation of the brakes, protects each piston. Moisture and dirt ingress through a ruptured boot is the most common cause of piston corrosion and seizure. A cuff installed inside prevents the leakage of the working fluid from the cylinder.