BRAKE CALIPER FOR MAZDA 626/III/Mk/Station/Wagon/Break CAPELLA/Rural 2.0L 4cyl FERODO FCL692522

A caliper is a caliper-shaped body that houses one or more brake cylinders. During braking, the hydraulics act on the pistons in the cylinders, and they press on the pads, pressing them against the brake disc and thus slowing down the rotation of the wheel.

The FERODO brand Brake Caliper is installed above the brake disc. The caliper is usually made of cast iron, less often of an aluminum-based alloy. Its design can have a fixed or floating bracket.

1. 626 III Coupe (GD)
2. CAPELLA III Coupe (GD)
3. 626 Mk III Coupe (GD)
4. 626 III Station Wagon (GV)
5. CAPELLA III Station Wagon (GV)
6. 626 III Break (GV)
7. 626 Mk III Station Wagon (GV)
8. CAPELLA III Rural (GV)
9. See more in applications

The construction of the brake caliper

The forces are transmitted via the highway to the front or rear caliper. The fluid drives the brake piston. He pushes the pads towards the disc. Each caliper can have from one to eight cylinders. A rubber boot, the condition of which largely determines the correct operation of the brakes, protects each piston. Moisture and dirt ingress through a ruptured boot is the most common cause of piston corrosion and seizure. A cuff installed inside prevents the leakage of the working fluid from the cylinder.