Water Pump - J1515004 HERTH+BUSS JAKOPARTS

An automobile water pump, also known as a pump, is designed to provide forced circulation of antifreeze in the cooling system - from the engine to the radiator and vice versa. For adequate cooling of the motor, not only artificial convection is used, but also additional cooling of the radiator with a fan. Stopping the water pump will slow down the movement of the antifreeze to such an extent that the engine will overheat in a matter of minutes (especially if the breakdown occurs in the heat).

1. COLT I (A15_A)
2. COLT I (A15_A, RA)
3. COLT � (A15_A)
4. COLT II (C1_A)
5. COLT II (C1_A, RB, RC)
6. COLT Mk II (C1_A)
7. COLT III (C5_A)
8. COLT III (C5_A, RD, RE)
9. COLT Mk III (C5_A)
10. LANCER F (A15_)
11. COLT Saloon (A15_, RC)
12. COLT (A15_)
13. LANCER III (C1_A, C6_A)
14. COLT III Saloon (C1_A, C6_A, RD, RE)
15. LANCER Mk III (C1_A, C6_A)
16. LANCER III Station Wagon (C1_V, C3_V)
17. LANCER III Break (C1_V, C3_V)
18. LANCER Mk III Station Wagon (C1_V, C3_V)
19. LANCER IV (C6_A, C7_A)
20. LANCER IV (C6_A, C7_A, CA, CB)
21. See more in applications

The work principle of the water pump

The principle of operation of a HERTH+BUSS JAKOPARTS brand Water Pump is pumping liquid through the use of centrifugal force: antifreeze enters the working chamber and a rotating impeller pumps it into the outlet pipe. This solution allows not to expose the pump mechanism to high temperatures: the antifreeze enters it already cooled. Stopping the engine cooling system can cause the engine to overheat. Exposure to high temperatures disturbs the geometry of the cylinder head and leads to damage to the crank mechanism.