Control Arm-/Trailing Arm Bush - 37-03911-6 DYS

The car suspension must move up and down to perform its function. This increases the comfort of driving, but at the same time, its movement can also spread unwanted noise and vibration to the chassis and interior.

The DYS brand Control Arm-/Trailing Arm Bush are used in steering and suspension components such as steering arms, anti-roll bars, ball joints, tie rods, shock absorbers and shock absorber mounts, at the attachment points of these elements to the chassis, as well as in engine and gearbox mountings, bushings provide a connection between various system elements with each other or with the vehicle chassis. Equally important, they act as a damper, controlling the range of motion in the joints, reducing road noise, vibration and improving a smooth ride for a more comfortable.

1. MEGANE II Estate (KM0/1_)
2. MEGANE II Grandtour (KM0/1_)
3. MEGANE II Sport Tourer (KM0/1_)
4. KANGOO Express (FW0/1_)
5. KANGOO Rapid (FW0/1_)
6. KANGOO BE BOP (KW0/1_)
7. MEGANE II Saloon (LM0/1_)
8. SCENIC II (JM0/1_)
9. KANGOO / GRAND KANGOO (KW0/1_)
10. KANGOO (KW0/1_)
11. MEGANE II (BM0/1_, CM0/1_)
12. MEGANE II Coupe-Cabriolet (EM0/1_)
13. GRAND SCENIC II (JM0/1_)
14. CLIO IV (BH_)
15. LUTECIA IV (BH_)
16. CLIO MIO IV (BH_)
17. CITAN Box Body/MPV (415)
18. CITAN Panel Van (415)
19. CITAN Mixto (Double Cabin) (415)
20. CITAN Dualiner (415)
21. See more in applications

Material of the bushings

Most of the bushings consist of a metal outer element, usually made of steel, aluminum and, in some cases, plastic, as well as silicone or nitrile rubber. Given the high dynamic loads to which they are subjected, this rubber must be resistant to wear, extreme temperatures and dirt. Therefore, there are also different classes of bushings depending on how soft or hard the composite rubber is.