Clutch Cable - K24680 A.B.S.

The clutch cable is designed for smooth adhesion of the vehicle to the road surface. It is only present in cars equipped with a manual transmission. It is made of strong coarse steel thread, which is protected by a plastic sheath.

One end of the cable is firmly attached to the clutch pedal with screws, and the other is loosely enough screwed to the bushing in the shield, which makes it possible for this part to rotate. To prevent the cable from breaking, a special stop is installed under the pedal.

When the clutch is engaged, the cable engages the fork, which in turn moves the release bearing. As a result, the driven disc is pressed against the basket, and the transmission is disconnected from the engine.

1. GOLF III (1H1)
2. GOLF Mk III (1H1)
3. VENTO (1H2)
4. VENTO Saloon (1H2)
5. JETTA III (1H2)
6. GOLF III Variant (1H5)
7. GOLF Mk III Estate (1H5)
8. GOLF III Estate (1H5)
9. GOLF III Cabriolet (1E7)
10. CABRIO III (1E7)
11. GOLF Mk III Cabriolet (1E7)
12. GOLF IV Cabriolet (1E7)
13. CABRIO IV Cabriolet (1E7)
14. GOLF IV Cabriolet (1E7, 1V7)
15. GOLF III Van (1H1)
16. GOLF Van III Variant (1H5)
17. See more in applications

The principles of the clutch cable usage

The A.B.S. brand Clutch Cable needs constant adjustment, which is necessary due to the natural wear of the drive during its operation. With excessive tension, it can burst, and when it sags, it ceases to perform its functions.

This part rusts quickly and can rupture, requiring immediate replacement. Malfunctions with the clutch release cable are indicated by the clutch pedal falling into the floor. When the cable is jammed, pressing the pedal, on the contrary, requires considerable effort.