Clutch Cable - 27SKV139 ESEN SKV

The clutch cable is designed for smooth adhesion of the vehicle to the road surface. It is only present in cars equipped with a manual transmission. It is made of strong coarse steel thread, which is protected by a plastic sheath.

One end of the cable is firmly attached to the clutch pedal with screws, and the other is loosely enough screwed to the bushing in the shield, which makes it possible for this part to rotate. To prevent the cable from breaking, a special stop is installed under the pedal.

When the clutch is engaged, the cable engages the fork, which in turn moves the release bearing. As a result, the driven disc is pressed against the basket, and the transmission is disconnected from the engine.

1. C25 Bus (280_, 290_)
2. J5 Bus (280P)
3. J5 Platform/Chassis (280L)
4. J5 Bus (290P)
5. DUCATO Panorama (280_)
6. DUCATO Platform/Chassis (280_)
7. DUCATO Van (290_)
8. DUCATO Panorama (290_)
9. J5 Platform/Chassis (290L)
10. J5 Van (290L)
11. DUCATO Van (280_)
12. DUCATO Platform/Chassis (290_)
13. J5 Van (280L)
14. C25 Van (280_, 290_)
15. C25 Platform/Chassis (280_, 290_)
16. TALENTO Van (290_)
17. TALENTO Platform/Chassis (290_)
18. TALENTO Bus (290_)
19. See more in applications

The principles of the clutch cable usage

The ESEN SKV brand Clutch Cable needs constant adjustment, which is necessary due to the natural wear of the drive during its operation. With excessive tension, it can burst, and when it sags, it ceases to perform its functions.

This part rusts quickly and can rupture, requiring immediate replacement. Malfunctions with the clutch release cable are indicated by the clutch pedal falling into the floor. When the cable is jammed, pressing the pedal, on the contrary, requires considerable effort.