Brake Pad Set, disc brake - TX 11-54 TOMEX Brakes

The disc brake mechanism consists of a rotating disc, two fixed pads installed on both sides of the disc inside a caliper, fixed on the trunnion bracket. Compared to drum-type shoe brakes, disc brakes have better performance properties, and since the front wheels require more braking forces when braking, installing the front wheels with these disc brakes improves the vehicle's performance.

If the brake is hydraulic, there is one or more hydraulic cylinders with pistons inside the caliper. If the drive is pneumatic, then the caliper has a wedge or other clamping device. When braking, stationary pads are pressed against a rotating disc, friction force and braking torque appear. The disc brake mechanism fits well into the wheel, has a small number of elements and is light in weight.

1. COLT III (C5_A)
2. COLT III (C5_A, RD, RE)
3. COLT Mk III (C5_A)
4. LANCER IV Hatchback (C6_A, C7_A)
5. LANCER IV Hatchback (C6_A, C7_A, CA, CB)
6. LANCER Mk IV Hatchback (C6_A, C7_A)
7. GALANT III (E1_A)
8. GALANT III Saloon (E1_A)
9. SIGMA III (E1_A)
10. GALANT Mk III (E1_A)
11. ETERNA III (E1_A)
12. GALANT IV Saloon (E3_A)
13. GALANT IV Saloon (E3_A, HG, HH)
14. GALANT Mk IV Saloon (E3_A)
15. ETERNA IV Saloon (E3_A)
16. GALANT IV (E3_A)
17. GALANT IV (E3_A, HG, HH)
18. GALANT Mk IV (E3_A)
19. ETERNA IV (E3_A)
20. GALANT V (E5_A, E7_A, E8_A)
21. And others

The actuality of usage

The TOMEX Brakes brand Brake Pad Set, disc brake are flat and have smaller dimensions, their design is developed for the possibility of installation in the caliper. Such pads are used in the front brakes of all modern passenger cars and in many commercial vehicles, and in recent years, disc brakes are increasingly used on the rear axle of passenger cars and commercial vehicles.