Brake Pad Set, disc brake - TX 10-181 TOMEX Brakes

The disc brake mechanism consists of a rotating disc, two fixed pads installed on both sides of the disc inside a caliper, fixed on the trunnion bracket. Compared to drum-type shoe brakes, disc brakes have better performance properties, and since the front wheels require more braking forces when braking, installing the front wheels with these disc brakes improves the vehicle's performance.

If the brake is hydraulic, there is one or more hydraulic cylinders with pistons inside the caliper. If the drive is pneumatic, then the caliper has a wedge or other clamping device. When braking, stationary pads are pressed against a rotating disc, friction force and braking torque appear. The disc brake mechanism fits well into the wheel, has a small number of elements and is light in weight.

1. TRANSPORTER II Bus
2. TRANSPORTER T2 Bus
3. TRANSPORTER Mk II Bus
4. TRANSPORTER III Bus
5. TRANSPORTER / CARAVELLE III Bus
6. VANAGON III Bus
7. TRANSPORTER T3 Bus
8. CARAVELLE III Bus
9. TRANSPORTER III Platform/Chassis
10. TRANSPORTER T3 Platform/Chassis
11. TRANSPORTER III Van
12. VANAGON III Van
13. TRANSPORTER T3 Van
14. TRANSPORTER II Van
15. TRANSPORTER T2 Van
16. TRANSPORTER Mk II Van
17. TRANSPORTER II Platform/Chassis
18. TRANSPORTER T2 Platform/Chassis
19. TRANSPORTER Mk II Platform/Chassis
20. And others

The actuality of usage

The TOMEX Brakes brand Brake Pad Set, disc brake are flat and have smaller dimensions, their design is developed for the possibility of installation in the caliper. Such pads are used in the front brakes of all modern passenger cars and in many commercial vehicles, and in recent years, disc brakes are increasingly used on the rear axle of passenger cars and commercial vehicles.